Use Of Hot Melt Adhesive

The use of hot melt adhesive sprayer, which is a manual spray small machine, only the glue into the drum, the temperature transferred to 100-150 degrees can be used continuously; such machines are generally used in wood, veneer, cardboard , Luggage and other small area occasions.

  The use of large and medium-sized hot melt coating, which is a continuous operation, the pipeline coating device, high efficiency; use the glue into the barrel, the temperature can be adjusted to 150 degrees can be used. Can be sprayed, which is any solid hot melt can not be done, so that can be applied to a variety of shapes of the product surface. Can also be heated in a small electric pot after the manual brush, the application of small pieces of products is very convenient. Or at room temperature, the two materials, composite, and then at a temperature of 150-180 degrees under the conditions of two to three minutes melt fusion; or the first coating on the substrate surface dry, in the oven / Drying and other conditions under the conditions of melting, and then the composite surface material can be pressed.