Guangzhou Tiege Woodworking Machinery

High quality product, professional service, being the core supplier in laser

Home / News / The Structure Of Hot Melt Coater

The Structure Of Hot Melt Coater

Views:2     Author:Site Editor     Publish Time: 2017-02-14      Origin:Site

Hot melt coating machine technology and the traditional solvent-based and water-soluble adhesive coating process has an enviable advantage, an effective solution to the traditional process of the inherent shortcomings, is the ideal compound coating industry replacement production tool.

Do not use sharp bits to remove the nozzle hole, so as not to damage the nozzle, causing the nozzle to spray the amount of hot melt is not uniform. When using a hot melt to clean the nozzle, follow the steps below: Use a smokeless hot air gun to heat it and clean it with a clean cloth. Soak the nozzle in the cleaning solvent, the conditions can be used to clean the ultrasonic. Soak the nozzle in the appropriate amount of chemical cleaning solvents, cleaning with iron, aluminum and other metal foreign body. Re-install the nozzle on the pneumatic needle valve nozzle combination, and the heating and spray part of the re-installed together. The filter unit must be installed before reassembling. And then connect the insulation tube to the assembly of the completion of the pneumatic needle nozzle combination up.



No. 5, North 6th Row, Caohe Village, Qiaonan Street, Panyu District, Guangzhou, Guangdong, China

Email Us

Copyright © Guangzhou Tiege Woodworking Machinery Co.,Ltd All Rights Reserved.