Views: 85 Author: Site Editor Publish Time: 2022-05-30 Origin: Site
What Is An Edge Banding Machine?
Edge bander is a kind of woodworking machinery and an important processing flow of furniture production line. An edge bander is a machine used to create decorative edges on panels and boards automatically. The machine cuts the wood's edge and then uses adhesive to attach colorful edge strips or other materials.It can replace traditional manual processes with highly automated machinery with the advantages of high processing quality and fast processing efficiency.
Edge Banding Machine Manufacturer From China
What are the functions of the edge banding machine?
Follow me to know about the edge banding machine features.
highly automated
high processing quality
fast processing efficiency
extreme accuracy
How Do Edge Banding Machine Work?
Some edge banding may use a self-stick method, like a sticker where you peel away the paper backing and then apply pressure. However, most edge banding comes with a hot-melt adhesive.Most edge bander machines work by feeding an edge stipping through a machine until it is tight against the processed particle board. Then a roller or hot air gun applies heat to activate the glue and hold the strip in place. A clamp then presses and holds the banding firmly against the board's edge as it moves through a roller press for several seconds to ensure that there is sufficient glue on all parts of the banding material.
Pre-milling
The edge banderthat will handle most aspects of the job all by itself making the process much easier and faster. Double milling cutters are used to modify the ripple marks, burrs or non-vertical phenomenon caused by the panel saw processing to achieve better edge sealing effect and to make the edge band and the board more tightly fit, better integrity and aesthetics.
Adhesive edge banding
Adopting a special structure, evenly apply adhesive on both sides of the edge banding plate and edge banding material to ensure a stronger adhesion. The edge banding machine will feed the material, bond the edge banding to the surface in question, and trim the edges.
Head-to-head
through precise linear guide rail movement, adopts automatic tracking of the mold and high-frequency high-speed motor fast cutting structure to ensure the cut surface is smooth and smooth.
Finishing
Both the profile automatic tracking and high-frequency high-speed motor structure are used to ensure the smoothness of the upper and lower parts of the trimmed board. It is used to repair excess edge banding material above and below the edge band of the plate. The finishing knife is an R-shaped knife. It is mainly used for PVC and acrylic edge banding for panel furniture.
Scraping
Used to eliminate the ripple marks caused by the non-linear motion of the trimming process, so that the upper and lower parts of the board are smoother and cleaner.
Polishing
Clean the processed sheet with a cotton polishing wheel, and make the edge sealing end surface smoother by polishing.
Slotting
It is used for direct slotting of wardrobe side panels, bottom plates, etc., reducing the process of panel sawing, and it is more convenient and fast. It can also be used for slotting of aluminum edging of door panels.
English
