L Shape Profile Wrapping Machine
Product Description
L shape profile wrapping machine : FMF-L
Main Profile width: 50 -180mm
Main profile thickness: 10 -40mm
Side profile width: 20 -60mm
Side profile thickness: 5 -18mm
L shape profile wrapping machine
Main infeed speed: 5 -30m/min
Working process length: 1500-3000mm
Infeed motor power: 3Kw
Total power: 5Kw
Volage: 380V
Machine size:6000x1600x1700mm
Machine weight: 2000kg
This machine is specialzie in make the „L“ shape profile ,model is FMF-L(normalyis righ sides direction.),and it is can finish the “L“ joint,the joint profiles can go to profile wrapping machine to finish wrapping film.。
A. Main machine:
The frame is composed of a solid steel structure and castings, all of which are processed and produced by the machining center, and the structure is stable.
-High-speed precision transmission system, 20 groups of transmission wheels quickly adjust the opening and closing device, and quickly adjust the feeding width according to the width of the material;
-The speed of the host is controlled by frequency converter, which is connected with the melt system by PLC and touch screen to form an automatic control, and the electrical components are Schneider.
-The workpiece feeding system is composed of a special high-precision chain. The conveyor chain block is assembled by quenching the round bar and the needle bearing. It is also equipped with round double-end sliding shoes and high friction surface rubber covered chain block.
-The upper pressure bar is installed on the shaft and used in conjunction with the conveyor chain. It is equipped with a rubber pressure wheel. The pressure wheel is mechanically electric lift. It is also suitable for processing small-sized workpieces.
-Adjustable speed of workpiece feed speed, 5-30 m/min.
B、Spread glue:PUR glue system
-5 Galon PUR glue melting system。
- One glue hose and one PLC control Glue injector。
- Glue type: Scrap glue ,the glue thickness and height can be adjust.
- L shape ,auto pusher ,600MM thickness capacity.
C.side profile infeed
- the side profile infeed control by pusher signal,working table is 2.5 meter.。
PLC control all process .
-The machine is specialize in making L shape ,the speed is 3-30m/min.
D.PUR glue melting system,5 galon.
The machine use the PUR glue .
a.Power of glue pump:7.8KW(One motor at above of glue drum and provide the power of the glue gear)
b、Heating power:7.2KW,It is have 24 pieces heating tube and provide power to melting glue.The power of heating tube is 0.3KW/pieces
c、Total power:15Kw
d、Gear pump:15grams/r
e、Glue:0-35Kg/h
f、Voltage:380V
g、Air pressure:6 Bar
h、Motor run speed:0.5-60r/min
i、dimension:1085*600*1214mm
j、weight:360Kg
Auto pusher : TG-3000L
Stack heighth: 300mm
Infeed width: 30-200mm
motor: 0.37kw
induction feed: limit switch
speed: 5-40m/min(invert control)
working action: side profile infeed