Article List

• The structure of the glue applicator

  structureDouble roller glue machineThe structure of the double-roller glue applicator is shown in the figure, which is mainly composed of a frame, a glue roller, a glue tank and a transmission device. The frame 1 is made of cast or welded steel, one on the left and one on the left, and two tie rod b

  August 17, 2020
• How to maintain the glue applicator

  maintain1) The glue applicator should be inspected every day before use. If any foreign matter is found, it should be cleaned up in time to check whether the equipment is lubricated normally and whether the moving parts are running flexibly.2) After the test run is normal, inject the glue into the g

  August 16, 2020
• Precautions for using edge banding machine

  PrecautionsThe main advantages of the curved and straight edge banding machine are firm bonding, fast, light, and high efficiency. In order to achieve this effect, in addition to choosing a good edge banding machine, we must also pay attention to the edge banding tape, hot melt adhesive, substrate,

  August 06, 2020
• Edge banding machine purchase skills

  Buying skillsThe air branch line edge banding machine is a machine with automatic electrical control and programmed operation. Please check carefully when purchasing. The main method is to listen to the manufacturer's product introduction, and have a general perceptual understanding of the required

  August 06, 2020
• What are the advantages of the packaging machine

  AdvantageIf you want to create the most benefits for yourself within the specified time, you must ensure that your food packaging production line is running well and that there will be no errors in the production process, so that the impact of errors and failures will be avoided for the company. The

  July 31, 2020
• The working principle of the glue applicator

  1) Double roller glue applicator.Its appearance is shown in the figure. The double-roller glue applicator is mainly composed of upper and lower glue rollers and glue tanks. The lower part of the lower glue roller is immersed in the glue tank, and the glue of the upper glue roller is transferred by t

  July 10, 2020
• How to use the glue applicator

  1) Reasonably adjust the gluing speed of the gluing machine. The speed of the glue roller should be adjusted appropriately according to the glue type and the thickness of the veneer during use. Under normal circumstances, the glue application speed of the glue with greater viscosity should be slower

  July 24, 2020
• Laminating machine pre-coating type

  This machine coating is formed at one time, and the consumables used have been coated with glue. When the coating is applied, the glue is melted by heating, and then the film is adhered to the printed matter by pressure. This kind of laminating equipment is cheap, simple to operate, and does not pro

  June 19, 2020
• Laminating machine instant coating type

  Instant coatingThe operation of this type of equipment includes three parts: gluing, drying, and hot pressing. The operation is relatively high. The advantage is that the quality of the finished product is reliable. Its fatal disadvantage is that oil-based glue will produce gases that affect human h

  June 19, 2020
• The principle of laminating machine

  (1) Paper can be protected by using a ready-to-use film as the cover. After the film is coated, the service life of the cover (or the surface of the printed product) can be extended, especially for the students' textbooks, so the amount is increasing.(2) Imprints are not easily destroyed. After bein

  June 12, 2020