Guangzhou Tiege Woodworking Machinery CO.,LTD

High quality product, professional service, being the core supplier in laser industry!

Home > News > Content
How To Use Hot Melt Adhesive Correctly?
- Feb 14, 2017 -

1, the use of hot melt adhesive sprayer, which is a manual spray small machine, only the plastic into the drum, the temperature transferred to 100-150 degrees can be used continuously, this machine is generally used in wood, veneer , Cartons, bags and other small area occasions. The following are the same as the "

2, the use of large and medium-sized hot melt coating, which is a continuous operation, the pipeline coating device, high efficiency, the use of glue into the barrel, the temperature can be adjusted to 150 degrees can be used. In this case,

3, can be sprayed, which is any solid hot melt can not be done, so that can be applied to a variety of shapes of the product surface. Can also be heated in a small electric pot after the manual brush, the application of small pieces of products is very convenient. The following are the same as the "

In addition, the hot melt adhesive can also be painted at room temperature, the two materials composite, and then at a temperature of 150-180 degrees under the conditions of melt compression for two to three minutes, or first coated with plastic on the substrate After the oven / bake and other temperature conditions, melting, and then the composite surface material can be pressed.